City of Everett Large Grant

Last spring we applied to the City of Everett for a large grant through the Lowell Neighborhood Association. Our request survived the review process and is now before the City Council and the Mayor. We can expect to receive funding for a number of projects within a month. Here is a budget for what we requested:

I have not seen how this budget may have been modified in the review process. There are several modifications I would suggest that we might want to make:

1) Funds for full restoration of the barn are probably not available until the economy improves. I suggest that we divert barn funds into soil amendments such as complete liming and more compost. I believe I can still get the FREE consultation from at least one local contractor.

2) We can get the bulletin board construction donated.

3) Given the weed situation, I suggest that frequent tillage will be more effective than a cover crop -- at least for several years. I suggest those funds be diverted to tilling.

You may have more suggestions.

2012 Thoughts

So here is a possible farm layout for 2012. This is just a thought at this time. All your ideas are welcome. For example, this plan doesn't show any winter crops. What should we plan for winter? Remember that this is the flood plain and it may be quite wet in the winter.

Volunteer needs

I am re-doing my estimate of volunteer hour needs based on the weediness and soil conditions of our farm. I now figure it takes 40 hours per week per acre plus 4 hours with a rototiller per acre to operate The Red Barn Community Farm during 5 months of the year. With 6 acres under tillage for the Food Bank, that means 240 volunteer hours per week plus 24 rototiller hours. This is with the soil all prepared in the spring and ready to plant. Preparation time is extra. We're just talking abut planting, weeding, watering and harvesting here.

If we can get volunteers who will offer 4 hours per week, we need 60 volunteers -- all at 4 hours per week. We also need 2 rototiller operators each contributing 12 hours per week to keep the weeds under control.

Tilling progress

Tilled over the "halfway" mark on the north area after a couple of hours of effort last night. The remaining area will start shrinking fairly quickly, and by the time we get done with that I'm sure the first section Dean did will need it again... never ending tilling fun. So far, the Kubota is able to knock out about an acre every three hours. That is with a reduced 40" wide tilling width due to having to relocate the tines to replace broken ones. I have a new set coming that should arrive this week, and will allow more thourough and quicker tilling. So far, we're looking at 2-1/2 to 3 quarts of fuel per hour.


The last two tilling sessions I have been visited by some local residents taking advantage of the local fauna. The picture is terrible, as it was taken from a shaking tractor by a shaking hand with a 5 year old camera phone - but you get the point.
These coyotes are excellent hunters - I've been able to watch them catch several rodents within 100 yards of me. They listen for their prey moving in the grass and then with an impressive vertical leap, they pounce on the unsuspecting rodents. They miss more than they catch, but they aren't starving. It sure is entertaining watching them "fly through the air with the greatest of ease." Keep your eyes peeled on the edges of the field in the evenings to watch their antics.

Kubota tiller

We have the good 20" wide tiller in the Ariens, and we now have a 48" wide tiller in the little Kubota 4X4 tractor with tiller attachment I picked up last night. It needs a little cleaning and a few tiller tines (man, those are expensive!), but I hope it will greatly increase the speed of the cultivation we can accomplish while sipping fuel until the money tree drops the $40K +/- we need for the real tractor. I plan on keeping a log of work produced vs. fuel consumption, with a goal of 2hrs of max-rated output per gallon. I'll keep you all "posted"!

Water, cont'd

As an add-on to Dean's post, I've received a donation from my employer of 300 feet of drip line that has a small amount of damage mid-line - nothing a little duct tape can't handle. It is not a rain-barrel soaker hose setup, but actual pressure irrigation drip line with 2 gph emitters every 12". As an experiment, I am going to run this east-west the length of my plot after I set up a barrel system as Dean describes. I'm hoping I can get enough pressure due to the height of the barrel and lay of the land to get the emitters to leak a little. I'll report back with news when I get this set up.

Chris

Water

The well didn't work as well as I had hoped. the shallow aquifer was too thin. I still think we could make it work for relatively small amounts of water, but it wasn't the gushing success I had dreamed of. If anyone would like to help dig, we could make a hole about 2 feet in diameter and 5 feet deep. We could sink a 20 gallon tub (Lowes) in the hole and let it fill from the thin shallow aquifer that would be above it. Then we could install a small pitcher pump and a cheap plastic pipe down into the tub. We could pump 20 gal. at a time and then have to wait for the tub to refill.

The rain barrel that I installed at the Demonstration garden is a better success. I have refilled it three times from another barrel in my truck by means of a small 12v pump that runs off my truck battery. Perhaps a larger rain barrel (250 gal tote $75 used) would last longer and be able to water a much larger area with a drip system.